Posted by: Gary from adsl-233-240-49.mia.bellsouth.net on May 10, 2010 at 19:19:13
In Reply to: Re: FMC 4100 ACL ERROR posted by Abe on April 30, 2010 at 16:39:49
Subject: Re: FMC 4100 ACL ERROR
Put cal puck(should be screwed into back near power switch)on
Hit F11 and see what you get in both displays.
Should get around .50 in each.
If your numbers are below .46 or above .54 then adjust side by side pots on pcb to get about .50 in each display
Then do F1 with cal puck still on spin and get "cal 0"
take off cal puck and spin again..."cal good"
Done
- Re: FMC 4100 ACL ERROR Ariana Jolly 8/27/2010
(0)